Archive for the ‘Emergency Response Plan’ Category
Thursday, July 22nd, 2010
OSHA Process Safety Management (PSM) program is nearly two decades old and I believe that the 14 PSM elements provide a good basic framework for facilities to create a safety program.
What OSHA PSM lacks is quality metric.
Let me explain further.
For example, one of the elements of the OSHA PSM is emergency planning. As a part of ...
Posted in Emergency Response Plan, OSHA PSM, Process Safety, Regulations | 1 Comment »
Wednesday, February 10th, 2010
RFID stands for Radio-Frequency IDentification. It is a small electronic device that consist of a chip (capable of carrying 2000 bytes of data) and an antenna.
A RFID device provides a unique identifier and serves the same purpose as a bar code on a consumer product or a magnetic strip on ...
Posted in Emergency Response Plan, Process Safety | 2 Comments »
Tuesday, September 8th, 2009
It has been exactly a year since Ike...so I figured this would be an appropriate time to post on hurricane risks.
During a hurricane plant equipment can be damaged both by high winds and flooding. For example, the majority of plant equipment damage caused by Hurricane Rita (2005) was wind related, ...
Posted in Emergency Response Plan, Hurricanes, Natural Disasters | 4 Comments »
Friday, August 21st, 2009
A chemical facility is mandated to have an emergency response plan by OSHA PSM and EPA RMP. An accident in the plant, a hurricane, and a potential terrorist attack are a few scenarios that mandate emergency response and planning. However, there is a vast difference between having an emergency plan ...
Posted in Emergency Response Plan, EPA RMP, OSHA PSM | 4 Comments »